HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

NOTE:
When security is set for a host storage domain, the LUN security setting of a port to which the host
storage domain belongs is automatically enabled. Make sure that the I/Os of the target port are
stopped.
Format
hdvmcli [URL] AddWWNForHostStorageDomain [options]
serialnum=serial-number model=model
{port=port-number|portname=port-name}
{domain=domain-ID|domainnickname=domain-nickname}
wwn=WWN [wwnnickname=WWN nickname]
Parameters
Table 79 AddWWNForHostStorageDomain command parameters
DescriptionStatusParameter name
Serial number of the storage system for the host storage domainRequired
serialnum
Model of the storage system for the host storage domainRequired
model
Port ID of the host storage domain
Specify either port or portname. Do not specify both parameters
at the same time. If they are specified at the same time, an error
will occur.
Optional
port
Port name of the host storage domain
Specify either port or portname. Do not specify both parameters
at the same time. If they are specified at the same time, an error
will occur.
Optional
portname
Domain ID of the host storage domain
This parameter can be specified in decimal and hexadecimal. If
you specify a hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
You must specify either domain or domainnickname. Do not
specify both parameters at the same time. If they are specified at
the same time, an error will occur.
Optional
domain
Nickname of the host storage domain
You must specify either domain or domainnickname. Do not
specify both parameters at the same time. If they are specified at
the same time, an error will occur.
Optional
domainnickname
Command reference232