HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

serialnum parameters, Port for the subtarget parameter, and WWN for the portsubinfo
parameter. In the execution result of this command, the wwn value appears under An instance
of WWN. Use this wwn value to specify the wwn parameter.
domainnickname
Obtain this value from the execution result of the GetStorageArray (subtarget=HostStor-
ageDomain) command. Execute this command by specifying only the model and serialnum
parameters, and HostStorageDomain for the subtarget parameter. In the execution result
of this command, the nickname value appears under An instance of HostStorageDomain.
Use this value to specify the domainnickname parameter.
Command execution example
hdvmcli AddWWNForHostStorageDomain
-o "D:\logs\AddWWNForHostStorageDomain.log"
"serialnum=10001" "model=XP1024" "port=1" "domain=1"
"wwn=22.33.44.55.44.55.44.33,11.33.22.33.44.33.22.22"
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 HostStorageDomain elements:
An instance of HostStorageDomain
objectID=*****
portID=1
portName=CL1-B
domainID=1
hostMode=Standard
displayName=CL1-B-1
domainType=0
nickname=HCMD0103
List of 2 WWN elements:
An instance of WWN
WWN=22.33.44.55.44.55.44.33
nickname=Jane
An instance of WWN
WWN=11.33.22.33.44.33.22.22
nickname=Jone
*****: The value is encoded by the CLI.
DeleteLun
DeleteLun deletes paths set from a host to a volume.
Command reference234