HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

hdvmcli [URL] AddConfigFileForReplication [options]
[groupname=copy-group-name]
pvolhostid=host-ID pvolinstancenum=instance-number
[pvolportnum=port-number]
svolhostid=host-ID svolinstancenum=instance-number
[svolportnum=port-number]
pvolarraytype=model pvolserialnum=serial-number
pvoldevnum=device-number
[pvolportid=port-number|pvolportname=port-name]
[pvolpoolid=pool-ID]
svolarraytype=model svolserialnum=serial-number
svoldevnum=device-number
[svolportid=port-number|svolportname=port-name]
[svolpoolid=pool-ID]
replicationfunction={BusinessCopy|ContinuousAccessSync|ContinuousAccessAsync
|Snapshot|ContinuousAccessJournal}
[munum=Mu-number]
• Method 3: Creates a new RAID Manager configuration definition file. To use this method, execute
the command in the following format:
hdvmcli [URL] AddConfigFileForReplication [options]
[groupname=copy-group-name]
pvolhostid=host-ID [pvolinstancenum=instance-number]
pvolportnum=port-number
svolhostid=host-ID [svolinstancenum=instance-number]
svolportnum=port-number
pvolarraytype=model pvolserialnum=serial-number
pvoldevnum=device-number
[pvolportid=port-number|pvolportname=port-name]
[pvolpoolid=pool-ID]
svolarraytype=model svolserialnum=serial-number
svoldevnum=device-number
[svolportid=port-number|svolportname=port-name]
[svolpoolid=pool-ID]
replicationfunction={BusinessCopy|ContinuousAccessSync|ContinuousAccessAsync
|Snapshot|ContinuousAccessJournal}
[munum=Mu-number]
Parameters
Table 103 AddConfigFileForReplication command parameters
DescriptionStatusParameter name
Group name used in the RAID Manager
You can use a maximum of 31 bytes. You cannot specify a name
that begins with a hash mark (#) or hyphen (-).
When using Method 1, specify a group name that is specified in
the definition file.
You must specify this parameter when you are using method 1.
Optional
groupname
Host ID for identifying the P-VOL
When using Method 1, specify the host ID of the P-VOL in a group
specified in the definition file.
Required
pvolhostid
Command reference284