HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

svolarraytype=model svolserialnum=serial-number
svoldevnum=device-number
[svolportid=port-number|svolportname=port-name]
[svolpoolid=pool-ID]
replicationfunction={BusinessCopy|ContinuousAccessSync|ContinuousAccessAsync
|Snapshot|ContinuousAccessJournal}
[munum=Mu-number] [fencelevel=fence-level]
[copytracksize=copy-pace] [pairoption=suspend]
• Method 3: Create a new RAID Manager configuration definition file, creates a copy group, then
adds a copy pair to the copy group. To use this method, execute the command in the following
format:
hdvmcli [URL] AddReplication [options]
[groupname=group-name]
pvolhostid=host-ID [pvolinstancenum=instance-number]
pvolportnum=port-number
svolhostid=host-ID [svolinstancenum=instance-number]
svolportnum=port-number
pvolarraytype=model pvolserialnum=serial-number
pvoldevnum=device-number
[pvolportid=port-number|pvolportname=port-name]]
[pvolpoolid=pool-ID]
svolarraytype=model svolserialnum=serial-number
svoldevnum=device-number
[svolportid=port-number|svolportname=port-name]]
[svolpoolid=pool-ID]
replicationfunction={BusinessCopy|ContinuousAccessSync|ContinuousAccessAsync
|Snapshot|ContinuousAccessJournal}
[munum=Mu-number] [fencelevel=fence-level]
[copytracksize=copy-pace] [pairoption=suspend]
Parameters
Table 105 AddReplication command parameters
DescriptionStatusParameter name
Copy group number
If you are using method 1, you must specify this parameter.
If you are using method 2 or 3, do not specify this parameter. If
you specify this parameter, method 1 is applied.
Optional
replication-
groupid
Group name used in the RAID Manager
Use a maximum of 31 bytes for a group name. The group name
cannot begin with a hash mark (#) or a hyphen (-).
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
groupname
ID of the host that recognizes the primary volume (P-VOL)
If you are using method 2 or 3, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
pvolhostid
CLI Reference Guide 295