HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

DescriptionStatusParameter name
Device number of the S-VOL
For P9500 and XP24000/XP20000:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format ww:xx:yy, where
ww is the LDKC number, xx is the CU number, and yy is the
LDEV number. ww is optional. If ww is omitted, LDKC is as-
sumed to be 0.
For XP12000/XP10000/SVS200:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format xx:yy, where xx is
the CU number, and yy is the LDEV number.
The execution results are output in decimal.
Optional
svoldevnum
Parameter values to obtain in advance
replicationgroupid, pvolserialnum, pvoldevnum, svolserialnum, and svoldevnum
Obtain the parameter values from the execution result of the GetHost command. Specify the
value of replicationGroupID that is displayed as An instance of ReplicationGroup
in the replicationgroupid parameter, the value of pvolSerialNumber that is displayed
as An instance of ReplicationInfo in the pvolserialnum parameter, the value of
pvolDevNum in the pvoldevnum parameter, the value of svolSerialNumber in the
svolserialnum parameter, and the value of svolDevNum in the svoldevnum parameter.
svolsequencenum
Obtain the parameter value from the execution result of the GetStorageArray command for
the storage system that contains the S-VOL. Specify the value of sequenceNumber that is displayed
as An instance of StorageArray in the svolsequencenum parameter.
Command execution example 1
This example deletes a copy pair for Continuous Access Synchronous Software that has been defined
in copy group 8. The primary volume (P-VOL) of the copy pair is the logical device with LDEV number
10 in the storage system with serial number 65010001. The secondary volume (S-VOL) is the logical
device with LDEV number 11 in the storage system with sequence number 0012.
hdvmcli DeleteReplication -o "D:\logs\DeleteReplication.log"
"replicationgroupid=8" "pvolserialnum=65010001" "pvoldevnum=10"
"svolsequencenum=0012" "svoldevnum=11"
Command execution result 1
The execution result displays the remaining copy pairs after deleting the specified copy pair.
RESPONSE:
An instance of ReplicationGroup
objectID=*****
replicationGroupID=7
groupName=HCMD_CG0007
pvolHostID=1
CLI Reference Guide 307