HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

DescriptionAttribute
mfUnallocatedCapa-
city
Number of open logical units to which paths are assigned
numberOfOpenAlloc-
atedLUs
Number of open logical units that satisfy the following conditions:
• Paths are not assigned.
• Paths can be assigned by using Device Manager.
numberOfOpenUnalloc-
atedLUs
Number of intermediate logical units to which paths are assigned
numberOfImAllocated-
LUs
Number of intermediate logical units that satisfy the following conditions:
• Paths are not assigned.
• Paths can be assigned by using Device Manager.
numberOfImUnalloc-
atedLUs
Number of mainframe logical devices
numberOfMfLDEVs
Number of mainframe logical devices to which paths are assigned
numberOfAllocatedM-
fLDEVs
Number of mainframe logical devices to which paths are not assigned
numberOfUnallocated-
MfLDEVs
Product code of the storage system
productCode
Time when the storage system was last refreshed
The number of seconds elapsed from 00:00:00 on January 1, 1970 (world
standard time) is displayed.
lastRefreshed
This item indicates whether an unformatted logical unit can be created.
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• -1: Unknown
• 0: Able to select whether to format a logical unit when it is created
• 1: A logical unit is automatically formatted when it is created
For other storage systems, -1 is output.
autoFormatLU
Indicates whether the target storage system is consistent with the Device Manager
database.
• 0: The Device Manager database is consistent.
• 1: The database is being updated. Wait until the update is done, and then
execute the GetStorageArray command.
• 2: The Device Manager database is inconsistent. Execute the AddStorage-
Array command to update the configuration information of the storage system,
and then execute the GetStorageArray command.
• 3 or 4: The database is being updated in the background. These values are
output only for SMI-S Enabled storage systems. If one of these values is output,
you can use the GetStorageArray command to obtain information.
statusOfDBInconsist-
ency
CLI Reference Guide 369