HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

Related commandsDescriptionItem
AddWWNForHostStor-
ageDomain
When setting up security for a LUN or host
storage domain, make sure that I/O operations
from the host to the LU of the corresponding port
have stopped.
If you set up security for a LUN or host storage
domain, the LUN security for the corresponding
port will take effect automatically. Because of
this, when the command is executed, if I/O
operations are taking place from the host to the
LU of the corresponding port, then the I/O
operations might terminate with an error.
Setting up security for a LUN or
host storage domain
AddHost
ModifyHost
AddStorageArray
When a CLI command and the GUI are used at
the same time, usable characters for host and
storage system names are the following:
A-Z a-z 0-9 - _ . @
Spaces can also be used, but you cannot use a
name that consists of spaces only.
If characters other than those shown above are
used, GUI operations might not be possible.
Usable characters for host and
storage system names.
AddURLLink
DeleteURLLink
When a CLI command and the GUI are used at
the same time, other Web programs provided
by the GUI might not be able to start. Only a
system administrator who has expert knowledge
can use this combination.
Using URLLink
AddLUSE
AddLun
AddReplication
When you use Disk/Cache Partition to create a
LUSE volume, path, or copy pair (Business Copy
Software), specify the same storage logical par-
tition. If you specify a different storage logical
partition, the storage partition administrator
cannot manage the created resource.
Using Disk/Cache Partition
(when using
XP12000/XP10000/SVS200)
All commands
When the user account-locking feature is enabled
in Common Component, if you have failed to
log in a specific number of times, the user ac-
count will be locked. As such, for operations in
which commands are sequentially executed, such
as when multiple CLI commands are executed
sequentially in batch, make sure beforehand that
the correct password is set for options and
properties.
Notes on account locking
All commands
If the attribute value -1 is output, possible causes
are as follows:
• The attribute is invalid.
• No value can be acquired.
• No value has been set.
Notes on when the attribute
value -1 is output
Executing commands42