HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

4 Command reference
This chapter describes the syntax and parameters of Device Manager CLI commands with execution
examples.
Storage system commands
The storage system commands can be used to register, modify, and delete storage system information.
AddArrayReservation
AddArrayReservation locks the target storage system.
When changing the storage system configuration, use this command to lock the target storage system
in order to avoid conflicts with other users' operations.
NOTE:
• The GUI cannot be used to change the configuration of a storage system that is locked via this
command.
• If you do not execute any commands for changing the storage system configuration or the
ModifyArrayReservation command within five minutes after locking the storage system,
the storage system will be unlocked.
The following commands, which are for changing the configuration of a storage system, can be
executed on a locked storage system by the user who locked the storage system:
• AddExternalArrayGroup
• AddHostStorageDomain
• AddLogicalUnit
• AddLun
• AddLUSE
• AddPool
• AddStorageArray
• AddTieredPoolOperation
• AddVirtualVolume
• AddWWNForHostStorageDomain
• DeleteArrayReservation
• DeleteExternalArrayGroup
• DeleteHostStorageDomain
• DeleteLogicalUnit
• DeleteLun
CLI Reference Guide 43