HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

DescriptionStatusParameter name
Port WWN of the external storage system
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set will become the primary path.)
Make sure that the order and number of the values specified for
these parameters are correct.
Required
externalwwn
LUN of the external volume
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set will become the primary path.)
Make sure that the order and number of the values specified for
these parameters are correct.
Required
externallun
Path group ID
If this parameter is omitted, a value is automatically set by Device
Manager.
Optional
pathgroupid
Emulation type of the logical unit
OPEN-V is the only value that can be specified.
If this parameter is omitted, OPEN-V is set.
Optional
emulation
CLPR number
If this parameter is omitted, 0 is set.
Optional
clprnumber
Option information (cache mode) of the logical unit
Either of the following values can be specified:
true: Valid
false: Invalid
If the cachemode parameter is omitted, the following values are
set:
When the inflowcontrol parameter is specified, true is
set.
When the inflowcontrol parameter is omitted
If the external volume is a command device, false is set.
If the external volume is not a command device, true is set.
Optional
cachemode
Option information (cache inflow control mode) of the logical unit
Either of the following values can be specified:
true: Valid
false: Invalid
If this parameter is omitted, false is set.
Optional
inflowcontrol
Command reference46