HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

isStandardLDEV=true

guardMode=

diskType=0

slprNumber=-1

clprNumber=-1

cacheResidencyMode=-1

stripeSizeInKB=-1

volumeKind=3

status=Blocked

thpType=-1

consumedSizeInKB=-1

mfTrueCopyVolumeType=Unknown

mfShadowImageVolumeType=Unknown

mfUniversalReplicatorVolumeType=Unknown

mfUniversalReplicatorPoolID=-1

thpPoolID=-1

threshold=-1

systemDisk=0

encrypted=-1

tieringPolicy=-1

*****: The values are encoded by the CLI.

AddPool

AddPool creates a THP/Smart pool in a targeted storage system.

NOTE:

• This command can be used only with P9500 and XP24000/XP20000.

• The attributes of the Pool instance, thresholdVolForewarn and thresholdVolOverwarn,

which were output as the execution results of this command, have changed to overProvision-

ingWarning and overProvisioningLimit, respectively. Check and, if necessary, revise

the script settings that you use in version 6.3 or later.

Conditions a logical unit must satisfy to be used as a THP/Smart pool volume :

• It has a capacity of 8 GB or more.

• It is not a LUSE volume.

• It is not a paired volume created with Business Copy Software, Continuous Access Software, or

Continuous Access Journal Software.

• It is not an Auto LUN Software reserved volume.

• It is not a pool volume or a journal volume.

• It has a status of Normal or Normal(Quick Format).

• It is not THP/Smart volume.

• It is not a system drive.

• It has a guard mode of Read/Write.

• It has an emulation type of OPEN-V.

• It is not a command device.

• It does not have a Cache Residency Manager set.

CLI Reference Guide 71