HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 Administrator Guide (web) (TB581-96325, December 2012)

Subject:[DVM] Alert Notification
The following alert occurred.
MessageID: ${messageID}
Alert Type: ${alertType}
Source: ${source}
Status: ${status}
Component: ${component}
Description: ${description}
Recommended Action: ${recommendedAction}
Additional Info: ${additionalInfo}
Occurrence Time: ${occurrenceTime}
This message was sent automatically by the Device Manager server.
The mail-alert-detection.txt file consists of a header (by default, Subject:[DVM] Alert
Notification) and the body of the email.
You can specify parameters for the header and body of the email. When the email is sent, the specified
parameters will be replaced with the alert information acquired by the Device Manager server. The
following table shows the specifiable parameters:
Table 45 Parameters you can set in the template file
DescriptionParameter name
Alert ID
messageID
Alert type
alertType
Storage system name
source
Severity of the alert
status
Storage system component where the alert occurred
component
Description of the problem
description
Action that has to be taken for the problem
recommendedAction
Supplementary information
additionalInfo
Time at which the Device Manager server acquired alert information
Display format: yyyy/mm/dd hh:mm:ss
hh is displayed by using 24-hour display.
occurrenceTime
Specify the mail-alert-detection.txt file so that all of the conditions below are satisfied. If
at least one condition is not satisfied, the Device Manager server will create an email by using the
default settings instead of using the settings of the template file that you edited.
• The file name is mail-alert-detection.txt.
• The file is stored in the same location as when the Device Manager server was installed.
• The file size is no more than 64 KB.
• Unicode (UTF-8) can be used as the character encoding.
Administrator Guide (Web Version) 139