HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 User Guide (TB581-96337, March 2013)

• The LDKC:CU:LDEV number for the volume is in the range from 00:00:00 to 00:FF:FF
• Volumes can be accessed, and are not reserved by other programs, or tasks.
• If the emulation type is not OPEN-V and both the migration source and the migration target volumes
are normal, or both are CVS volumes.
Volume migration requirements related to volume type
Whether you can select a volume as a migration source or migration target depends on the volume
type. The following table shows which volume types can and cannot be selected as migration sources
and targets.
Table 18 Migration sources and targets by volume type and state
TargetSourceVolume Type, State
YYNormal volumes
YYExternal volumes
Y
Y
1
LUSE volumes
NNSmart volumes to which a data placement profile is applied
THP/Smart
volumes
2
NNVirtual volumes that are not associated with a THP/Smart pool
YYVolumes other than the above
Y
3
NTHP/Smart pools
NNTHP/Smart pool volumes
NNVolumes for which Cache Residency, Cache Residency for Mainframe is set
NNCommand Device
NNVolumes that are configured as a Cross-system Copy pair
NYNAS system volumes
NNSystem Disk
NNVolumes that are configured for concurrent copying
NNOn-demand device volumes
NNIntermediate volumes
NYMainframe volumes for which a path is set
YYMainframe volumes for which SYSPLEXID is set
YYMainframe volumes for which DEVN is set
NYMainframe volumes for which VOLSER is set
NNQuorum disks used for External Storage Access Manager
NN
P-VOL
S-VOL
External Storage
Access Manager
Operations in Legacy mode148