HP P9000 Replication Manager Software 7.2 User Guide

Figure 10 Configuration with Virtual Command Device server
Prerequisites for virtual command device configurations
The following requirements apply to virtual command device configurations.
NOTE:
To monitor pool usage or journal usage for XP12000/XP10000/SVS200, XP24000/XP20000, and
HP StorageWorks P9500 storage systems, the pair management server and Virtual Command Device
server must be discovered by Replication Manager (or, in the case of HP StorageWorks P9500, the
system must be configured for managing copy groups defined by device group).
Table 14 System prerequisites
PrerequisiteTarget
The Device Manager server has discovered storage systems with primary and
secondary volumes, and the server has been registered to Replication Manager
as an information source.
Management server
Device Manager agent 7.1.0 or later and P9000 RAID Manager 01-25-xx/xx or
later must be installed.
The configuration definition file is in a format that is supported by Device Manager
agent, and the P9000 RAID Manager instance must have started normally.
Pair Management server
Managing pair life cycle246