HP P9000 Tiered Storage Manager Software 7.4.1-00 CLI Reference Guide (TB585-96029, April 2013)

# IOSuppressionMode=Disable
sourceControllerDeviceNumber=3:A7
targetControllerDeviceNumber=2:84
# Target candidates for source LDEV - 3:A7, 3:A6
# emulationType=OPEN-V
# CVS=Yes
# capacityInKB=10,240,320
# LBA=20,480,640
# subsystem=XP12K/10K/SVS200#14011
# SLPRNumber=0
# CLPRNumber=0
# arrayGroupName=1-10-1
# diskType=FC
# RAIDLevel=RAID5(3D+1P)
# cacheMode=Disable
# IOSuppressionMode=Disable
# xpThinProvisioning=-
# arrayGroupBusyRate=50.00
# arrayGroupMaxBusyRate=60.73
# targetControllerDeviceNumber=2:80 * (3:A6)
# targetControllerDeviceNumber=2:84 * (3:A7)
# targetControllerDeviceNumber=2:85
# targetControllerDeviceNumber=2:86
# targetControllerDeviceNumber=2:87
# targetControllerDeviceNumber=2:89
# targetControllerDeviceNumber=2:8A
# targetControllerDeviceNumber=2:8C
# targetControllerDeviceNumber=2:8F
# targetControllerDeviceNumber=2:91
# targetControllerDeviceNumber=2:92
# targetControllerDeviceNumber=2:95
# targetControllerDeviceNumber=2:99
# targetControllerDeviceNumber=2:9E
# targetControllerDeviceNumber=2:9F
# targetControllerDeviceNumber=2:A0
# targetControllerDeviceNumber=2:A3
# targetControllerDeviceNumber=2:A4
# targetControllerDeviceNumber=2:A5
# targetControllerDeviceNumber=2:A6
# targetControllerDeviceNumber=2:A7
KATS10602-W message-contents
• Command execution example (4):
This example uses the same conditions as those used for Command execution example (2) to
create a candidate migration plan. In this example, a storage tier created by using pool filter
conditions is specified as the target storage tier.
htsmcli CreateMigrationPlan storagedomainname="MegaTechXP12000-Primary"
migrationgroupname="MG011" targetstoragetiername="MegaTech-HighCost"
• Execution results (4):
CLI Reference Guide 101