HP P9000 Tiered Storage Manager Software 7.4.1-00 CLI Reference Guide (TB585-96029, April 2013)

3 Using CLI commands
This chapter provides the information required to use CLI commands. This chapter also explains the
user permissions, storage location, syntax, and parameter formats of CLI commands.
CLI commands and user permissions
Before CLI commands are executed, settings for users who will execute the commands need to be
specified. Use the GUI to specify these settings. For details about how to set user permissions, see the
HP P9000 Command View Advanced Edition Suite Software User Guide. The method for specifying
user settings for using a CLI command is the same as the method for specifying settings for when the
GUI is used in Legacy mode.
After registering the users who will execute commands, assign the Device Manager role for the All
Resources resource group to the user groups to which the users belong. In addition, to execute a
CLI command, you need to set up user permissions for Tiered Storage Manager software. The required
permissions depend on the command. The table below describes the user permissions required for
each command.
Table 2 CLI commands and the necessary user access permissions
Permission
Command name
ViewExecuteModifyAdmin
----Y--
AddVolumeToMigrationGroup
----Y--
CancelTask
----Y--
CreateLockingTask
----Y--
CreateMigrationGroup
YYYY
CreateMigrationPlan
----Y--
CreateMigrationTask
----Y--
CreateShreddingTask
----Y--
CreateStorageTier
----Y--
CreateUnlockingTask
----Y--
DeleteMigrationGroup
----Y--
DeleteStorageTier
----Y--
DeleteTasks
--YY--
ExecuteTask
CLI Reference Guide 27