HP P9000 Tiered Storage Manager Software 7.4.1-00 CLI Reference Guide (TB585-96029, April 2013)

ManualsBrandsHP ManualsSoftwareHP XP Array Manager Enterprise Media Kit

4 Filter conditions that can be used in the

CLI

This chapter provides an overview of the filter condition expressions that can be specified for the

filtercondition parameter and the newfiltercondition parameter, and describes the syntax

and properties that can be specified for filter condition expressions.

Types of filter conditions

For CLI commands that have access to the filtercondition parameter or the

newfiltercondition parameter, filter condition expressions can be specified to limit the command

execution scope, or to use the filtered results to manage storage tiers.

Filter condition expressions are specified by combining properties. Properties in this chapter refer to

comparison-predicate values in the filter condition expressions described in “Syntax of filter

condition expressions” on page 36.

The following table describes the types of filter condition expressions.

Table 4 Types of filter condition expressions

Specifiable properties

Description and commands that

have access to the filter

Filter name and function

The properties to specify differ depending

on the target (volume or pool) managed

by the storage tier.

• If the filter targets are volumes, see

Table 5 and Table 8.

Note that some properties might not

be specifiable for filter conditions that

are used to filter volumes managed

in storage tiers.

• If the filter targets are pools, see Table

6 and Table 9.

Filter condition expressions for

volumes and pools in storage tiers

Because a storage tier cannot

manage both volumes and pools

at the same time, volume filter

conditions and pool filter conditions

cannot be specified at the same

time.

Commands that have access to this

filter type:

• CreateStorageTier

• ModifyStorageTier

Filter condition expressions

for storage tiers

(storage-tier-

filter-condition)

See Table 5 and Table 8.

Filter condition expressions used to

filter storage domains and volumes

in storage tiers

Commands that have access to this

filter type:

• CreateMigrationPlan

• GetVolumes

Filter condition expressions

for volumes

(volume-filter-condition)

CLI Reference Guide 35