HP P9000 Tiered Storage Manager Software 7.4.1-00 CLI Reference Guide (TB585-96029, April 2013)

DetailsParameter
Specify the controller logical device number in the following formats:
[logical-DKC-number:]CU-number:LDEV-number
Specify hexadecimal values that are less than 0x100 and that are separated by
colons (:). A 0 at the beginning of the first value can be omitted.
The following are specification examples:
• When omitting a logical DKC number: Specify 2:0a or 02:0A.
• When specifying a logical DKC number: Specify 0:02:0a or 00:02:0A.
controllerdevi-
cenumber
Specify whether it is permissible to move the volume of another migration group.
This can be either Yes or No:
• Yes: Moving the volume of another migration group is permitted
• No: Moving the volume of another migration group is not permitted (default)
[movefrommigration-
group]
Legend:
[ ]: Specifying this parameter is optional.
Output items
NOTE:
For some output items, Unknown is output when one of the following conditions are met:
• When the volume information in the storage domain cannot be obtained for some reason (for
example, volumes in the storage system have been deleted by Device Manager).
• When the information regarding the externally connected storage cannot be obtained.
• When the externally connected storage system is an SMI-S Enabled storage system.
Table 35 Items output by the AddVolumeToMigrationGroup command (StorageDomain instance)
DescriptionItem
The name of the storage domain
name
Table 36 Items output by the AddVolumeToMigrationGroup command (MigrationGroup instance)
DescriptionItem
The name of the migration group
name
Indicates whether migration is possible
canMigrate
Event notification address
notifyToURL
Date and time the specified elapsed-period event occurs
remindAt
Description to be displayed when the specified elapsed-period event occurs
reminderDescrip-
tion
Parity group selection rule
arrayGroupSelec-
tionRule
Details of CLI commands84