HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.0 Mainframe Agent Installation and Configuration Guide (TB581-96014, November 2010)

• In this example, the command is used to lock the copy groups used in the backup identified by
the backup ID 0000000001:
PROMPT> drmresync -backup_id 0000000001
Basic command specifications (Tape-related commands)
drmmediabackup (Backs up data from a secondary volume to a tape device)
Format
drmmediabackup backup-ID [ -raw ] [ -bkdir backup-file-directory ]
[ -bup_env configuration-definition-file-name ]
Description
The drmmediabackup command backs up data to a tape device based on the backup information
specified by the backup ID. Before executing this command, you must execute the drmmount command
to mount the secondary volume to the specified mount point directory on the backup server. After
executing the drmmediabackup command, you must also execute the drmumount command to
unmount the secondary volume.
The drmmediarestore command can restore data backed up by the drmmediabackup command.
Before executing the drmmediabackup command, confirm the following:
• The volume is linked to the backup management product.
• The drmmount command has been executed and the secondary volume to be backed up has
been mounted.
• The copy group including the secondary volume to be backed up is locked to prevent servers
other than a backup server from performing operations on that secondary volume.
• A definition file for the tape backup has been created.
• The secondary volume is not in the mirror status.
If an error occurs during execution of the drmmediabackup command, check the contents of the
trace log of the backup management product that is provided by Application Agent. Then, take action
for the error according to what was output to the log.
For NetBackup
The trace log is output to the following file:
Application-Agent-installation-directory\DRM\log\drm_nbu_backup.log
For Backup Exec
Application Agent programs do not provide trace logs for Backup Exec. If an error occurred,
check the log provided by Backup Exec, or use the GUI to check the status, and then take appro-
priate action.
Take the command retry period into consideration when you execute more than one drmmediabackup
command concurrently.
CLI Reference Guide 123