HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.0 Mainframe Agent Installation and Configuration Guide (TB581-96014, November 2010)
Storage group name = STR1
KAVX0002-I The drmexgbackup command will now end.
• In this example, the command is used to perform a cold backup for the storage groups specified
in the target definition file C:\temp\BACKUP_DB.txt:
PROMPT> drmexgbackup -mode cold -f C:\temp\BACKUP_DB.txt
KAVX0001-I The drmexgbackup command will now start.
KAVX1805-I The information store will now be dismounted.
Storage group name = STR1
KAVX1805-I The information store will now be dismounted.
Storage group name = STR2
KAVX1805-I The information store will now be dismounted.
Storage group name = STR3
KAVX1600-I Backup processing will now start.
KAVX0040-I The backup ID has been assigned as follows:
Backup ID = 0000000001
KAVX1601-I Backup processing has finished.
KAVX1806-I The information store will now be mounted.
Storage group name = STR1
KAVX1806-I The information store will now be mounted.
Storage group name = STR2
KAVX1806-I The information store will now be mounted.
Storage-group-name = STR3
KAVX0002-I The drmexgbackup command will now end.
• In this example, the command is used to use VSS for backup:
PROMPT> drmexgbackup -mode vss
KAVX0001-I Starting the drmexgbackup command.
KAVX0256-I Connecting to the Protection Manager Service is performed.
Host name = BackupServer
KAVX1600-I Backup processing will now start.
KAVX1610-I Verification of the database on the backup server will now be performed.
Storage group name = STR1
File size = 6532 [MB]
KAVX1611-I Verification has finished successfully.
KAVX0040-I The backup ID has been assigned as follows.
Backup ID = 0000000001
KAVX1601-I Backup processing has finished.
KAVX0002-I The drmexgbackup command will now end.
• To perform a backup using VSS with a cascade configuration:
PROMPT> drmexgbackup -mode vss -cascade
KAVX0001-I The drmexgbackup command will now start.
KAVX5412-I The values in the following section of the definition file
for the cascade configuration will be used.
Local site = LOCALSITE
Remote site = REMOTESITE
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = BKSERV1
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = DBSERV2
KAVX1600-I Backup processing will now start.
KAVX5400-I Backup pre-processing will now be performed by using DBSERV2.
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = BKSERV2
KAVX0257-I The connection with the Protection Manager service will now be terminated.
Host name = BKSERV2
KAVX5401-I Backup pre-processing was performed by using DBSERV2.
KAVX5108-I Resynchronizing a copy group.
Copy group name = SI01,dev01
KAVX5108-I Resynchronizing a copy group.
Copy group name = SI01,dev02
KAVX5403-I Processing to resynchronize a copy group will now be performed by using DBSERV2.
Basic commands190