HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.0 Mainframe Agent Installation and Configuration Guide (TB581-96014, November 2010)

[ -comment backup-comment ]
[ -script user-script-file-name ]
[ -s backup-server-name
[ -auto_import
[ -auto_mount [ mount-point-directory-name ]]
]
[ -svol_check ]
]
To perform a cold backup:
drmfsbackup { mount-point-directory-name | mount-point-directory-target-definition-file-name }
-mode cold
[ -rc [ name-identifying-the-generation ]] [ -pf copy-parameter-definition-file ]
[ -comment backup-comment]
[ -script user-script-file-name]
[ -s backup-server-name
[ -auto_import
[ -auto_mount [ mount-point-directory-name ]]
]
[ -svol_check ]
]
To perform a VSS backup:
drmfsbackup { mount-point-directory-name | mount-point-directory-target-definition-file-name }
-mode vss
[ -rc [ name-identifying-the-generation ]] [ -pf copy-parameter-definition-file ]
[ -comment backup-comment]
[ -vf VSS-definition-file-name]
[ -script user-script-file-name ]
[ -s backup-server-name
[ -auto_import
[ -auto_mount [ mount-point-directory-name ]]
]
[ -svol_check ]
]
Description
The drmfsbackup command backs up the volume that contains the file system for the specified mount
point directory to the secondary volume. You can back up more than one file system at a time. If the
file system for the mount point directory consists of more than one volume, all the primary volumes
are backed up to the secondary volumes.
Before executing this command, the following operations are needed:
• All the application programs using the volume to be backed up must be stopped. The volume being
used by the OS cannot be backed up.
• The cache of the secondary volume must be cleared. To clear the system cache, mount the secondary
volume on the backup server, and then unmount the secondary volume.
When the drmfsbackup command is executed on the local site, and the pair status is SMPL, the
command does not automatically create a pair. In such a case, if the PAIR_CREATE parameter in
the RAID Manager-linkage definition file (DEFAULT.dat) is set to ENABLE, the command automatically
creates a pair.
When the drmfsbackup command is executed while the pair status is SMPL, the paircreate
command is not automatically executed. Execute the paircreate command only when the
PAIR_CREATE parameter of the RAID Manager-linkage definition file (DEFAULT.dat) is set to
ENABLE.
After installation, if the drmfsbackup command is executed without executing the drmfsdisplay
command with the -refresh option specified, and no dictionary map files are created, the dictionary
Basic commands84