HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

Item
Version
serviceip_addressdev_group
Yes
Supports IP address
and host name.
Yes6.1 to 6.4
Only supports port number specification.
Supports IP address
and host name.
YesEarlier than 6.0
Legend:
Yes: Supports all description formats.
Table 86 Support status of HORCM_LDEVG parameter description format
Item
Version
All parameters
NoEarlier than 7.1
Legend:
No: Does not support any description formats.
Table 87 Support status of HORCM_ALLOW_INST parameter description format
Item
Version
All parameters
NoEarlier than 7.1
Legend:
No: Does not support any description formats.
Requirements for the configuration definition file
• A configuration definition file cannot include a line that consists only of space characters.
• If the version of Device Manager agent is 5.5 or earlier, a line that starts with H and includes any
of the following character strings cannot be included (except in the starting line of the parameter):
HORCM_MON, HORCM_CMD, HORCM_DEV, HORCM_LDEV,HORCM_INST, HORCM_INSTP, HOR-
CM_CTQM, HORCM_LDEVG, HORCM_ALLOW_INST
• If the version of the Device Manager agent is from 7.0.0 to 7.0.1, a virtual command device must
not be defined for the HORCM_CMD parameter in the configuration definition file.
• The configuration definition file must be created in accordance with the following conditions:
• HORCM_MON must be defined.
• At a minimum, either HORCM_DEV or HORCM_LDEV must be defined.
• At a minimum, either HORCM_INST or HORCM_INSTP must be defined.
• HORCM_ALLOW_INST must not be defined.
Administrator Guide (Web Version) 223