HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

Cluster virtual IP address
Cluster virtual machine name
NONE6
__NONE__
When the version of the Device Manager agent is 5.7 or earlier:
Loopback IP address (from 127.0.0.1 to 127.255.255.254)
Loopback host name (localhost)
Cluster virtual IP address
Cluster virtual machine name
NONE
NONE6
• For service, specify the port name using 1 to 15 single-byte characters. The environment must
support the conversion of port names to port numbers.
• For service, specify the port number as a numeric value from 0 to 65535.
HORCM_CMD parameter
The following explains the description rules related to dev_name. For dev_name, you must specify
a command device that is recognized by the host. The description rules differ depending on the
specification format:
IPCMD format
\\.\IPCMD-IP-address-of-the-virtual-command-device-port-number[-unit-
ID-of-the-storage-system]
PhysicalDrive format
\\.\PhysicalDrivedisc-number-defined-by-Windows
For the Device Manager agent 1.1 or earlier, this item is case sensitive.
GUID format
\\.\Volume{GUID}
CMD format
\\.\CMD-serial-number[-logical-device-number[-port-name[-host-group-
number]]]
You must use base-10 numbers to specify the serial number and logical device number. For the
host group number, if the version of the Device Manager agent is 5.6 or later, specify a value
from 0 to 254. If the version of the Device Manager agent is 5.5 or earlier, specify a value from
0 to 127.
HORCM_DEV parameter
The following explains the description rules related to dev_group, dev_name, port#, and MU#.
• Specify dev_group and dev_name using no more than 31 single-byte characters. A hyphen (-)
cannot be specified at the beginning of the character string.
• The same dev_name value must not be duplicated in a configuration definition file.
• The combination of the dev_group and dev_name values must not be duplicated in the config-
uration definition file for a host.
• If you specify the host group number immediately after specifying the port name for port#, the
range of values that you can specify differs depending on the version of the Device Manager
agent. When the version of the Device Manager agent is 5.6 or later, specify a value from 0 to
Using and maintaining the Device Manager agent226