HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

hbsa_modinfo command
The hbsa_modinfo checks the available agent functions (add-on modules). The hbsa_modinfo
command is stored in the following locations:
In Windows:
installation-folder-for-Device-Manager-agent\bin\hbsa_modinfo.bat
In Solaris, Linux, or HP-UX:
/opt/HDVM/HBaseAgent/bin/hbsa_modinfo
In AIX:
/usr/HDVM/HBaseAgent/bin/hbsa_modinfo
The following table describes the hbsa_modinfo command syntax.
Table 94 hbsa_modinfo command syntax
DetailsItem
hbsa_modinfo [name-of-the-addon-module]
Synopsis
Uses V.R1.R2-MM (V: version number, R1 and R2: revision numbers, MM: modification version
number) to display all add-on module names and versions that are ready for use. You can also
specify an add-on module to check whether the module is ready for use.
This operation requires Administrator or superuser privileges. If the OS is Windows Server
2008 or Windows Server 2008 R2, the command must be executed from a command prompt
started as an Administrator.
If applicable add-on modules are not found, a message appears indicating that the system
was unable to find the add-on modules. However, the hbsa_modinfo command completes
normally.
Also note that hdlm is displayed for the add-on module name only if the OS is Windows and
the version of Hitachi Dynamic Link Manager agent is 6.0 or later.
Description
name-of-the-addon-module
Specifies the following abbreviations for add-on modules whose availability you wish to
check:
hdlm: Hitachi Dynamic Link Manager agent
hdvm: Device Manager agent
hrpm: Replication Manager agent
hrpmap: Replication Manager Application agent
Options
The following describes add-on modules that can be checked by the hbsa_modinfo command and
provides a functional overview.
• Hitachi Dynamic Link Manager agent
Monitors and adjusts the access route between the host and storage systems.
• Device Manager agent
Collects host and storage system usage.
• Replication Manager agent
Monitors the status of storage system replication.
• Replication Manager Application agent
Administrator Guide (Web Version) 231