HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

DetailsItem
Starts or stops the service or daemon process of the Device Manager agent. Also, this command
displays the status of the service or daemon process.
This operation requires Administrator or superuser privileges. If the OS is Windows Server
2008 or Windows Server 2008 R2, the command must be executed from a command prompt
started as an Administrator.
Description
start
Starts the service or daemon process.
Options
stop [-f]
Stops the service or daemon process.
If any add-on module or version 5.8 or later of Hitachi Dynamic Link Manager is still
running, you might not be able to stop the Device Manager agent service. In such a case,
the error message KAIE62604-E is output. Wait until the add-on module or Hitachi Dy-
namic Link Manager completes its operation, and then execute the command again.
If you urgently need to stop the Device Manager agent, you can force the Device Manager
agent service to shut down by executing the hbsasrv command with the stop -f option.
In such a case, all processing is forced to terminate, thus ongoing processing of jobs is
not guaranteed.
status:
Displays the service or daemon process operating status.
If the command execution result displays Status as Running, the Device Manager agent
service or daemon process is running. If the result displays Status as Stop, the service
or daemon process has stopped.
Caution: The version displayed when you execute the hbsasrv command is not the Device
Manager agent version. You must use hdvm_info commands to check the Device Manager
agent version.
hdvm_info command
The hdvm_info command displays the version of the Device Manager agent. The hdvm_info
command is stored in the following locations:
In Windows:
installation-folder-for-Device-Manager-agent\bin\hdvm_info.exe
In Solaris, Linux, or HP-UX:
/opt/HDVM/HBaseAgent/bin/hdvm_info
In AIX:
/usr/HDVM/HBaseAgent/bin/hdvm_info
The following table describes the hdvm_info command syntax.
Table 97 hdvm_info command syntax
DetailsItem
hdvm_info
Synopsis
Administrator Guide (Web Version) 233