HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

DetailsItem
The hdvm_info command displays the version of the Device Manager agent in V.R1.R2-
MM format, where V is the version number, R1.R2 is the revision number, MM is the modified
version.
Description
NoneOptions
hdvmagt_setting command
The hdvmagt_setting command provides an interactive interface for specifying the following
information in one operation:
• Information for the Device Manager server
• Execution period for the HiScan command
• Information for using RAID Manager
The hdvmagt_setting command is stored in the following locations:
In Windows:
installation-folder-for-Device-Manager-agent\bin\hdvmagt_setting.exe
In Solaris, Linux, or HP-UX:
/opt/HDVM/HBaseAgent/bin/hdvmagt_setting
In AIX:
/usr/HDVM/HBaseAgent/bin/hdvmagt_setting
The following table describes the hdvmagt_setting command syntax.
Table 98 hdvmagt_setting command syntax
DetailsItem
hdvmagt_setting
Synopsis
IP address or host name
Enter the IP address or host name of the Device Manager server.
If you specify the IP address, you can use either an IPv4 or IPv6 address.
Abbreviation can be used.
The host name must satisfy the following conditions:
Host name length: 50 bytes or less
Available characters: A to Z a to z 0 to 9 - _ . @
Port number
Enter the port number of the Device Manager server to which the Device
Manager agent connects. Specify a number from 0 to 65535.
User ID and password
Enter the user ID and password for the Device Manager agent registered
with the Device Manager server. For a built-in account for use with the
Device Manager agent, the user ID is HaUser and the default password
is haset. If you want to use another account with the Device Manager
agent, you must register the user ID in the PeerGroup user group in
advance.
Setting the
Device Man-
ager server in-
formation
Description
Using and maintaining the Device Manager agent234