HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

DetailsItem
You can select one of the following three automatic execution periods for
the HiScan command:
• Hourly
• Daily
• Weekly
Note that any execution time can be specified.
If you do not specify the execution time, for the hourly execution period, the
HiScan command is executed at the 30th minute of every hour. For the
daily or weekly period, the command is executed at 2:30 AM.
In Windows, specifying an execution period registers exeHiScan.bat as
a Windows task.
Setting the ex-
ecution period
for the HiS-
can com-
mand
Installation location
Specify the drive or directory where RAID Manager is installed. Do not
specify a floppy disk drive or CD-ROM drive.
Central management method
Specify whether to perform central management of copy pairs on the
target hosts.
Setting inform-
ation for using
RAID Man-
ager
NoneOptions
Note:
This operation requires Administrator or superuser privileges. If the OS is Windows Server 2008
or Windows Server 2008 R2, the command must be executed from a command prompt started
as an Administrator.
HiScan command
The HiScan command is used to send host information to the Device Manager server. The HiScan
command is stored in the following locations:
In Windows:
installation-folder-for-Device-Manager-agent\bin\HiScan.bat
In Solaris, Linux, or HP-UX:
/opt/HDVM/HBaseAgent/bin/HiScan
In AIX:
/usr/HDVM/HBaseAgent/bin/HiScan
The following table describes the HiScan command syntax.
Table 99 HiScan command syntax
DetailsItem
HiScan {-s server-destination [-u user-id -p password] [{-c
sec|-t output-file-name}]|-t output-file-name}
Synopsis
Administrator Guide (Web Version) 235