HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

<element attribute/>
The following table describes the parameter information output in message details:
Table 124 Parameter information output in message details
DescriptionItem
A character string that indicates the element name. For information on the
elements that are output and their meanings, see Table 125. However, Table
125 might not contain some displayed characters.
element
Format: info='...'
Attribute values specified for the element are output. When two or more attribute
values are output, they are separated by a comma (,). Each attribute value is
output as a character string or a numeric value.
If no corresponding attribute was specified or nothing was specified for the
attribute value, no attribute value is output. If no attribute was specified or
nothing was specified for attribute values, this item is not output.
If an attribute value contains a single-quotation mark (') or comma (,), the
quotation mark or comma is replaced with a question mark (?).
For details on the sequence in which attribute values are output, see Table
125.
attribute
The table below shows the sequence in which attribute values are output for each element.
Table 125 Sequence in which attribute values are output for each element
Sequence in which attribute values are output
#1
Full name and con-
tent
Output character
string
alert numberAlert
(Information about the
error that occurred in
Device Manager or
the storage system)
Alert
number
--
Alerts
(A group of Alert
elements)
Alerts
<model name
#2
- serial number - chassis number - parity
group number>, number of chassis containing the parity
group, parity group number, parity group RAID level, CLPR
number, emulation mode, optional information for external
parity group, type
ArrayGroup
(Information about the
array group of the
storage system)
ArrGrp
<model
#2
- serialnum - chassis - number>, chassis, number,
raidType, clprNumber, emulation, volumeType, type
<model name
#2
- serial number>, <model name
#2
- serial
number>
ArrayReservation
(Lock information of
the storage system)
ArrRsrv
<model
#2
- serialnum>, <model
#2
- serialnum>
Administrator Guide (Web Version) 285