HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

CAUTION:
If this property is set to true, synchronization of the information will take several minutes. If you
change the property and then log in to Device Manager right away, an error might occur. In such a
case, wait until the synchronization has finished, and then log in.
Default: false
server.cim.agent
This property allows you to specify the name of the host on which the Device Manager agent is
installed when the function for acquiring storage system performance information is used.
Performance information can be acquired only when this property is specified.
Default: None
server.cim.support
This property determines whether CIM support is enabled. If you want to execute CIM, you must set
this property to true.
This property is set to true during a new installation of Device Manager. For an overwrite installation
or upgrade installation, the value that is already set is used.
Default: true
server.cim.support.job
This property specifies whether a method for creating or deleting a volume, setting or releasing a
path, setting or cancelling security for a LUN, or creating or deleting a LUSE volume is executed
asynchronously or synchronously. If you set this property to true, the method is executed
asynchronously. If you set this property to false, the method is executed synchronously. If the CIM
client does not support the job control subprofile, specify false.
If you specify any values other than true or false, or if this property does not exist, the method is
executed asynchronously.
Default: true
server.cim.support.protocol
This property sets whether to open or close the ports used by the CIM function. A value of 1 to 3 can
be specified. When 1 is specified, the port for non-SSL transmission is opened and the port for SSL
transmission is closed. When 2 is specified, the port for non-SSL transmission is closed and the port
for SSL transmission is opened. When 3 is specified, both ports are opened.
This property is set to 3 during a new installation of Device Manager.
Default: 3
server.cim.http.port
This property specifies the port for non- SSL transmission for the CIM function.
Administrator Guide (Web Version) 315