HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

NOTE:
The Device Manager agent uniquely creates and manages the configuration definition files and
instances for monitoring to monitor the statuses of copy pairs in Replication Manager. The HORCM
instance for monitoring is the instance of RAID Manager used by the Device Manager agent. The
HORCM file for monitoring is the RAID Manager configuration definition file of that instance.
agent.rm.TimeOut
Specify the time limit for a response from the RAID Manager command used by the Device Manager
agent (in seconds).
Specify a value from 0 to 86,400. Specify 0 for no time-out.
Default: 600
Normally, the values set for these parameters do not need to be changed. To change their values,
you need expert knowledge of the Device Manager agent.
agent.rm.everytimeShutdown
Specify whether to stop the HORCM instance for monitoring every time.
Specify true or false. If true is specified, the instance stops every time. If false is specified, the
instance does not stop.
Default: false
Normally, the values set for these parameters do not need to be changed. To change their values,
you need expert knowledge of the Device Manager agent.
agent.rm.shutdownWait
Specify the wait time when stopping the HORCM instance for monitoring (in seconds).
Specify a value from 1 to 60.
Default: 5
agent.rm.horcmInstance
Specify the instance number of the HORCM file for monitoring.
Specify a value from 0 to 4,094. This value must be different from the instance number of other RAID
Manager configuration definition files.
Do not specify a value from 990 to 998 because Device Manager agent uses these values.
Default: 4094
agent.rm.horcmService
Specify the UDP port number of the HORCM file for monitoring.
Specify a value from 0 to 65,535. This value must be different from the port number of other
applications.
Device Manager agent properties352