HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

for the target copy pair command device (if a command device is set for the HORCM_CMD parameter
in IPCMD format), LDEV numbers will be output in decimal format regardless of the value specified
for this parameter.
Default value: CULDEV
server.agent.rm.exclusion.instance
On the host where the Device Manager agent is installed, to exclude volume pairs already managed
by RAID Manager from Device Manager operations, specify the applicable RAID Manager instance
numbers. The volume pairs excluded from Device Manager operations are also excluded from
Replication Manager operations. To specify multiple instance numbers, separate the individual numbers
with commas (,). From the Device Manager agent, you cannot operate a RAID Manager whose
instance number is specified in this property.
Default: None
server.agent.rm.location
Specify the RAID Manager installation directory in the following cases:
• RAID Manager is installed in a location other than the default location
• The host OS is Windows, and the RAID Manager installation drive is different from the Device
Manager agent installation drive
For Windows, you cannot specify \ as a delimiter. Use \\ or / instead.
Default for Windows: drive-where-Device-Manager-agent-is-installed/HORCM
Default for UNIX: /HORCM
server.agent.rm.optimization.userHorcmFile
Specify whether to optimize the user-created RAID Manager configuration definition files. To optimize
the file, specify true. If you do this, the file is updated so that Device Manager can use it. Also, when
the Device Manager agent starts or when the configuration definition file is updated by pair operations,
the following optimizations are performed:
• The unit ID, LDEV number, and serial number of a command device are added as comments.
• If the above command device becomes unavailable due to, for example, a change to the volume
name, the configuration definition file information is updated so that the command device can be
used.
• If the host is connected to multiple command devices in a storage system and only some of those
command devices are specified, the rest of the command devices are specified as reserved com-
mand devices.
• Command devices that are not being used are deleted.
• The CU and LDEV numbers of a command device and pair volume are added as a comment in
the format cu:ldev.
• If there are multiple definitions for a command device of the same storage system in an SLPR en-
vironment, rearrange the order of the command device definitions.
• Apply the value specified in the server.agent.rm.horcm.poll property to poll of the
HORCM_MON parameter in the configuration definition file.
Default: false
Administrator Guide (Web Version) 361