HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

DescriptionPort number
Used internally for Common Component communication (receiving a termination
message from the Web server).
If a product other than Common Component is using this port number, change
the settings of that product or of Common Component. For details about how
to change the Common Component settings, see “Changing ports used by
Common Component” on page 69.
23018/tcp
Used internally for Common Component communication (communication with
the Web server).
If a product other than Common Component is using this port number, change
the settings of that product or of Common Component. For details about how
to change the Common Component settings, see “Changing ports used by
Common Component” on page 69.
23025/tcp
Used internally for Common Component communication (receiving a termination
message from the Web server).
If a product other than Common Component is using this port number, change
the settings of that product or of Common Component. For details about how
to change the Common Component settings, see “Changing ports used by
Common Component” on page 69.
23026/tcp
Used internally for Common Component communication (HiRDB).
If a product other than Common Component is using this port number, change
the settings of that product or of Common Component. For details about how
to change the Common Component settings, see “Changing ports used by
Common Component” on page 69.
23032/tcp
Used internally for Common Component communication (HiRDB).
You cannot change the settings by using Device Manager. If products using
these ports are installed on the same computer, change the settings of those
products.
45001/tcp to 49000/tcp
#:
This port is also used when SSL is enabled. If you want to permit only SSL communication, set up
a firewall as described in “Port settings for operation in an environment with a fire-
wall” on page 72.
Ports used by the Device Manager server
The following table describes the ports used by the Device Manager server.
Table 14 Ports used by the Device Manager server
DescriptionPort number
Used for receiving SNMP traps from P9500, XP24000/XP20000,
XP12000/XP10000/SVS200, and XP1024/XP128.
162/udp
Used for communication with a CIM client.427/tcp
Network configuration66