HP StorageWorks P9000 Replication Manager Software 7.1 CLI User Guide (TB584-96026, May 2011)

Specifiable valuesDescriptionParameter
0 to 3600
In this parameter, specify the
same number of seconds as the
retry interval for checking the
status of a pair.
RETRY_WAIT
0 to 3600
Specifies the maximum number
of retries for checking the comple-
tion of pair resynchronization.
RESYNC_RETRY_TIME
0 to 360000
Specifies the retry interval for
checking the completion of pair
resynchronization (in units of 10
milliseconds).
RESYNC_RETRY_WAIT
0 to 3600
Specifies the maximum number
of times a retry can be performed
for checking whether pair splitting
has finished.
SPLIT_RETRY_TIME
0 to 360000
Specifies the retry interval for
checking whether pair splitting
has finished. You can specify a
value in units of 10 milliseconds.
SPLIT_RETRY_WAIT
0 to 3600
Specify the maximum number of
times a retry can be performed
for checking whether resynchron-
ization on restoration has fin-
ished.
RESTORE_RETRY_TIME
0 to 360000
Specifies the retry interval for
checking whether resynchroniza-
tion on restoration has finished.
You can specify a value in units
of 10 milliseconds.
RESTORE_RETRY_WAIT
0 to 3600
Specify the maximum number of
retries that will be performed to
confirm whether the volume is
ready for resynchronization. You
need to specify this parameter if
you want to check whether the
pair status allows execution of
pairresync -restore for
restoration. If you specify 0, Ap-
plication Agent continues to retry
checking until it can check the
pair status.
RESTORE_DELAY_RETRY_TIME
CLI User Guide 127