HP StorageWorks P9000 Replication Manager Software 7.1 CLI User Guide (TB584-96026, May 2011)

Omission
Maximum
character
length
Description
#2
Parameter
#1
N10
Specify the number of the RAID
Manager instance that is managing
Remote Copy in the cascade
configuration.
All of the Remote Copy copy groups
must be managed by this instance. If
you are using VSS to perform the
backup, the instance specified in this
parameter must be the same as the
instance that is being managed by
Application Agent.
INSTANCE_NUMBER
N10
Enter the number of Remote Copy copy
groups in the cascade configuration.
COPY_GROUP_NUM
N64
Enter the names of the Remote Copy
copy groups in the cascade
configuration.
You can specify this parameter more
than once (using one specification per
line). However, the number of times this
parameter is specified must match the
number of copy groups specified in the
COPY_GROUP_NUM parameter.
COPY_GROUP
Y
5
(The
maximum
value is
86400.)
Specify the timeout value for
configuration check processing at the
remote site as a value between 0 and
86400 (in seconds).
If you specify 0, this processing does
not time out. If you omit this
specification, 3600 is assumed.
Only parameter values in sections that
are considered to be for the remote site
are used.
As a rule, set this value to roughly 1.5
times the period required to run the
backup command for the site at which
this parameter is specified when the
-cascade option is not specified
(assuming all of the other options are
the same).
PREBACKUP_TIMEOUT
CLI User Guide 153