HP StorageWorks P9000 Replication Manager Software 7.1 CLI User Guide (TB584-96026, May 2011)

After storing the operation definition file in the stipulated directory, execute the check tool for operation
definition files to check the content of the operation definition file and automatically create a temporary
directory for extended commands.
Deployment of operation definition files
Create two same operation definition files for each target mount point or file. Place one operation
definition file on the file server and the other on the backup server. In a cluster configuration, the same
operation definition file must be located on all the servers where the cluster resource (mount point or
file) to be backed up is defined.
The following figure shows the locations of operation definition files.
Figure 56 Example of deploying operation definition files (cluster configuration when the backup is
of a file system)
In this example, the virtual server VServer_C is running on the file server A (server name:
FSServer_A) and the file server B (server name: FSServer_B), which are making up the cluster.
The three mount points D:, M:, and N: exist on the file server A and file server B, and the virtual
server C (server name: VServer_C) has been defined as a cluster resource. The mount points M:
and N: are assumed to be set in the mount point directory target definition file app.txt so that the
mount point directories are operated at one time.
In this example, on the file server A and the file server B, place the operation definition file about D:
and the operation definition file about the mount point directories (M: and N:) specified in the
app.txt. On the backup server (server name: BKServer), place the operation definition file about
D: and the operation definition file about M: and N:.
Format of operation definition files
An operation definition file is created, for each operation ID that uniquely identifies the processing
target, with a name in the following format:
Application-Agent-installation-destination\script\conf\_operation-ID.dat
The sample file for the operation definition file is stored in the following location:
Application-Agent-installation-folder\script\sample
CLI User Guide 187