HP StorageWorks P9000 Replication Manager Software 7.1 CLI User Guide (TB584-96026, May 2011)

2. Import the temporary files, which were transmitted from the database server, into the backup
catalog on the database server.
To import the temporary files, which were transmitted from the database server, into the backup
catalog on the database server, execute EX_DRM_DB_IMPORT.
DBServer >EX_DRM_DB_IMPORT Operation_A
3. Check that the temporary file has been imported correctly.
To check that backup information bearing the date on which the storage groups had been backed
up from the primary volume to the secondary volume has been imported into the database server,
execute the drmexgcat command on the database server.
DBServer > drmexgcat
STORAGEGROUP: STR1
BACKUP-ID:0000000003 BACKUP-MODE: COLD STORAGEGROUP: STR1 ORIGINAL-ID:0000000001
START-TIME:2004/08/05 10:00:00 END-TIME: 2004/08/05 10:01:00 HOSTNAME:DBServer
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE
COPY-GROUP
M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.edb D: - Harddisk1
Cnt Ac01,EXG11
- - - - - - -
Cnt Ac01,EXG11
M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.stm D: - Harddisk1
Cnt Ac01,EXG11
- - - - - - -
Cnt Ac01,EXG11
T TRANSACT - E:\STR1\E00.log E: - Harddisk2
Cnt Ac02,EXG12
- - - - - - -
Cnt Ac02,EXG12
T TRANSACT - E:\STR1\E000001.log E: - Harddisk2
Cnt Ac02,EXG12
- - - - - - -
Cnt Ac02,EXG12
C CHECKPOINT - E:\STR1\E00.chk E: - Harddisk2
Cnt Ac02,EXG12
- - - - - - -
Cnt Ac02,EXG12
DBServer >
4. Restore the data from the secondary volume to the primary volume.
Restore the data by resynchronizing the primary and secondary volumes. To restore the data,
execute EX_DRM_EXG_RESTORE on the database server.
DBServer > EX_DRM_EXG_RESTORE Operation_A -resync
5. Resynchronize the copy groups.
To resynchronize the copy groups, execute EX_DRM_RESYNC on the database server.
DBServer > EX_DRM_RESYNC Operation_A
Backing up and restoring in a cascade configuration
This section provides an example of backing up and restoring in a system configuration that consists
of a database server and a backup server in a cascade configuration.
The following examples are provided:
CLI User Guide 425