HP StorageWorks P9000 Replication Manager Software 7.1 CLI User Guide (TB584-96026, May 2011)
Since a RAID Manager instance (instance number: 1) is running on the database server, and a RAID
Manager instance (instance number: 2) is running on the backup server, horcm1.conf and
horcm2.conf files are placed on the database server and backup server, respectively. Also, since
this example uses a cluster configuration, configuration definition files with the same contents need
to be placed on both the active server and the standby server.
• RAID Manager configuration definition file, for the database server
(C:\Windows\horcm1.conf)
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
localhost horcm1 6000 3000
HORCM_CMD
#dev_name dev_name dev_name
\\.\PHYSICALDRIVE1
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
VG01 VOL11 CL2-A 16 19 0
VG01 VOL12 CL2-A 16 20 0
VG01 VOL13 CL2-A 16 21 0
VG01 VOL14 CL2-A 16 22 0
VG02 VOL21 CL2-A 16 19 1
VG02 VOL22 CL2-A 16 20 1
VG02 VOL23 CL2-A 16 21 1
VG02 VOL24 CL2-A 16 22 1
VG03 VOL31 CL2-A 16 19 2
VG03 VOL32 CL2-A 16 20 2
VG03 VOL33 CL2-A 16 21 2
VG03 VOL34 CL2-A 16 22 2
HORCM_INST
#dev_group ip_address service
VG01 localhost horcm2
VG02 localhost horcm2
VG03 localhost horcm2
• RAID Manager configuration definition file, for the database server
(C:\Windows\horcm2.conf)
CLI User Guide 523