HP XP P9000 Replication Manager Software 7.6.0-00 Application Agent CLI User Guide
• drmfsbackup
• drmsqlbackup
• drmexgbackup
• drmresync
Table 31 Parameter in the RAID Manager-linkage definition file (DEFAULT.dat) (to specify whether
to create a pair automatically)
Specifiable values
(default)
DescriptionParameter
DISABLE or ENABLE
(DISABLE)
Specifies whether Application Agent automatically
creates paired volumes.
If DISABLE is specified, Application Agent will not
automatically create a pair. However, a pair is not
automatically created when backing up to a
secondary volume at a remote site even if ENABLE
is specified. To automatically create a pair, you need
to specify ENABLE before updating the dictionary
map files.
PAIR_CREATE
#
#
When you use HP XP24000, HP XP20000 or XP12000/XP10000/SVS200, this parameter is
valid.
Settings for using secondary volume dynamic recognition
If Application Agent is configured so that backups are taken from the secondary volumes to a tape
device, you can make the OS dynamically recognize the secondary volumes that connect to the
backup server. Making the OS dynamically recognize the secondary volumes prevents the secondary
volumes from being accessed via an operation that is not performed using Application Agent. This
helps ensure more reliable backup and restore operations.
Table 32 Parameters in the RAID Manager-linkage definition file (DEFAULT.dat) (settings for using the
secondary volume dynamic recognition functionality)
Specifiable values
(default)
DescriptionParameter
DISABLE or ENABLE
(DISABLE)
Specify this parameter if you want to make the OS
dynamically recognize volumes on the file/database
server or backup server.
If you specify DISABLE or omit the specification,
dynamic recognition of volumes is disabled. If you
specify ENABLE, volumes can be recognized
dynamically.
DEVICE_DETACH
NOTE:
Of the physical disks connected to the device adapter port, do not use the LUN#0 disk for the primary
and secondary volumes if the secondary volume is to be recognized dynamically. If you use the LUN#0
physical disk, the system might not be able to recognize the other physical disks.
Application Agent CLI User Guide 127