HP XP P9000 Replication Manager Software 7.6.0-00 User Guide

Setting performance monitoring conditions for each pool

To set the performance monitoring conditions on a pool basis:

1. If you intend to use SNMP traps to send alerts, load the MIB definition files into the software that

will receive the traps.

For the location of the Replication Manager MIB definition files, see “About MIB definition

files” on page 434.

2. From the Explorer menu, choose Resources and then Storage Systems.

The Storage Systems subwindow appears.

3. Expand the object tree, and then select a storage system under Storage Systems.

The summary information for the selected storage system is displayed.

4. Click the Open link.

The Open subwindow appears.

5. On the Pools page, select the check boxes of the pools where you want to set monitoring

conditions, and then click Create Alerts.

The Create Alert Setting Wizard starts with the 1. Introduction page displayed.

If you select the Don’t show this message again check box, this page is not displayed in the

future.

6. Read the wizard page, and then click Next.

The 2. Select Monitoring Type page appears.

7. Select the Performance Monitoring option, and then click Next.

The 3. Select Alert Setting page appears.

8. Select the Create New Alert Setting option, and then click Next.

The 4. Edit Alert Action page appears.

9. Specify the alert notification conditions and method.

You can also save these settings as a template or use an existing template.

10. Click Next.

The 5. Confirm page appears.

11. Confirm the settings that will be applied, and then click Confirm.

The 6. Finish page appears.

12. Click Finish.

The settings specified in the wizard are registered in the list of alert settings.

To view this list, from the Explorer menu, choose Alerts and then Alerts.