HP XP P9000 Replication Manager Software 7.6.0-00 User Guide

PermissionsExplorer menu
ViewModifyAdminMenu commandSubmenu
NNYMaintenanceAdministration
NNYData Retention
Legend:
Y: Can be executed with this permission.
N: Cannot be executed with this permission.
About operation modes
During storage system maintenance it may be necessary to disable Replication Manager monitoring
functions. This can be done by entering maintenance mode.
Normal mode
The default mode. In this mode, you can perform all operations, including refreshing management
information (automatically or manually) and manipulating copy pairs.
Maintenance mode
In this mode, automatic refreshing of management information is disabled. You cannot perform manual
refreshing or manipulate copy pairs, and the action buttons for executing these operations are disabled.
Viewing the operation mode
You can view the Replication Manager operation mode, which is either normal mode or maintenance
mode.
To view the operation mode, from the Explorer menu, choose Administration and then Maintenance.
The current Replication Manager operation mode is displayed in the Maintenance subwindow.
You can also check the current operation mode from the Dashboard menu.
Related topics
• About operation modes, page 442
Changing the operation mode
Changing the operation mode suppresses operations on storage systems during maintenance operations
(such as replacement of the storage system microprogram).
To change the operation mode (which is either normal or maintenance mode):
1. From the Explorer menu, choose Administration and then Maintenance.
The Maintenance subwindow appears.
System maintenance442