HP XP P9000 Replication Manager Software 7.6.1-00 Application Agent CLI User Guide

ManualsBrandsHP ManualsSoftwareHP XP Array Manager Enterprise Media Kit

151

152

153

154

155

156

157

158

159

160

DescriptionSystem Environment Variable

Specifies the installation drive for RAID Manager.

Specify the drive name and a colon (:) as shown

below.

For example, when installing RAID Manager in the

D drive, specify as follows:

VSXPRMDRV=D:

Note that when installing RAID Manager in the system

drive, you need not specify this value.

VSXPRMDRV

• After setting the above system environment variables, restart the OS.

• In a configuration where multiple file servers or database servers are sharing one backup server,

manage all the secondary volumes in a single RAID Manager instance on the backup server.

Using VSS with P9000 RMXP Shadow Copy Provider version 01-02-03/02 or

earlier

If you use a version of P9000 RMXP Shadow Copy Provider that is earlier than 01-02-03/03 and

perform backup operations by using VSS, only the following operations are available:

• A backup to a single generation

• A backup within a storage system (local backup)

If you want to perform the following operations, upgrade the version of P9000 RMXP Shadow Copy

Provider to 01-02-03/03 or later, and then set up each server by referring to “Using VSS with P9000

RMXP Shadow Copy Provider version 01-02-03/03 or later” on page 150:

• A backup to multiple generations

• A backup between storage systems (remote copy)

• A backup with a name identifying the generation specified

This section describes the system setup for each server.

Set the system environment variables for the file server or database server, as shown in the table

below.

Table 45 System environment variables required to use VSS (file server or database server)

Variable DescriptionSystem Environment

Specifies the instance number of the RAID Manager

that manages the primary volume used in VSS backup.

The specified value must be specified in the HOR-

CMINST parameter of the RAID Manager-linkage

definition file (DEFAULT.dat).

VSXPHORCMINST_LOCAL

Specifies the MU# (pair identifier) of the copy group

that uses VSS for backup.

VSXPHOMRCF_MUN

Application Agent CLI User Guide 151