HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

To set system options:

1. Click Settings > Environmental Settings > Edit System Options.

2. Select the system option to set and click Enable.

• Hide alert information. If you enable this system option, the Alert window does not open.

• Refresh forcibly after Apply. If you enable this system option, after settings changes are applied

to the storage system, the configuration information for the storage system is forcibly updated.

• Disable data polling. If you enable this system option, polling stops.

• Disable retry of data updating. If you enable this system option, retry does not occur even if

data cannot be acquired.

• Enable Remote Web Console 2 All Function. If you enable this system option, the restrictions

on login from Remote Web Console's login window are cleared, including the restrictions on

the users who can log in and on the functions available after login. When enabling or disabling

the system option, log in again.

3. Click Finish. The Confirm window opens.

4. In the Confirm window, check the settings and enter a task name in Task Name.

5. Click Apply. The task is registered. If the Go to tasks window for status check box is checked,

the Task window opens.