HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

If no command device recognized by the host is detected, nothing is output to the perf_cmd-

dev.properties file.

verify

This option compares the settings for the command devices defined in the perf_cmddev.prop-

erties file to the settings for the command devices recognized by the host. If the host recognizes

multiple command devices, the execution result is output for each.

• If the information of a command device defined in the perf_cmddev.properties file

matches the information of the command device recognized by the host, the following message

is displayed:

The definition of the command device is valid.

• If the host does not recognize a command device defined in the perf_cmddev.properties

file:

The error message KAIC28615-W and information of the command device that is not recog-

nized by the host are displayed.

• If a command device recognized by the host is not defined in the settings file:

The error message KAIC28616-W and information of the command device that is not defined

in the settings file are displayed.

Note that, if the settings for a command device are defined in the perf_cmddev.properties

file by using the format of version 6.3 or earlier, the command device is assumed to belong

to SLPR0.

view

This parameter displays the settings for the command devices defined in the perf_cmddev.prop-

erties file.

In the perf_cmddev.properties file, UNKNOWN is displayed for any lines on which non-re-

cognizable values are defined or that are not correctly formatted. Comment lines and blank lines

are not displayed. In addition, if no value is specified in the perf_cmddev.properties file,

only the header is displayed.

The following is an example of output from the command. The items that are output are the same

as the items set in the perf_cmddev.properties file.

Raid ID Serial# SLPR# LDEV# Device file name

R500 14050 0 345 \\.\PhysicalDrive3

R601 44332 1 456 \\.\Volume{xxxxxxx-xxxx-xxx-xxxxxxxx}

R501 UNKNOWN - 1045 \\.\PhysicalDrive10