HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

/opt/HDVM/HBaseAgent/mod/hdvm/config
Format of the perf_cmddev.properties file
Define one command device per line, using the following format.
When using the Device Manager agent version 6.4 or later:
RAID-ID.serial-number.[SLPR-number.]LDEV-number: deviceFileName
When using the Device Manager agent version 6.3 or earlier:
RAID-ID.serial-number.LDEV-number: deviceFileName
The following table describes values to be specified in the perf_cmddev.properties file.
Table 48 Settings in the perf_cmddev.properties file
ValueSetting item
Specify one of the following depending on the type of the target storage
system:
R700 for HP P9500
R600 for HP XP24000
R601 for HP XP20000
R500 for HP XP12000
R501 for HP XP10000
R502 for SVS200
RAID-ID
Specify the serial number of the storage system by using a decimal
(base 10) number.
Serial-number
Specify the number of the SLPR to which the command device belongs
by using a decimal (base 10) number. If no SLPR is configured, specify
0.
This item is optional. If you omit this item or define this item by using
the format for version 6.3 or earlier, it is assumed that no SLPR has
been configured.
SLPR-number
Specify the CU:LDEV number of the command device by using a
decimal (base 10) number.
LDEV-number
Specify the command device identifier (the PhysicalDrive number,
VolumeGUID, or device file name) that the host recognizes in the
following format:
#
• In Windows:
\\.\PhysicalDriveX
\\.\Volume{GUID}
• In Linux:
/dev/sdx
x is an integer.
deviceFileName
#:
• If this item is specified using the physical drive number in Windows or Linux and you then restart
the OS, the physical drive number and device file name might be changed. If this occurs, you
need to execute the perf_findcmddev command to check and update the settings. In Windows,
Configuring Device Manager for CIM/WBEM158