HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

• service
Specify the port name or port number.
• Specify the port name using 1 to 15 single-byte characters. The environment must support the
conversion of port names to port numbers.
• Specify the port number as a numeric value from 0 to 65535.
• poll
Specify a value (in ten millisecond units) or -1.
• timeout
Specify the timeout period in ten millisecond units.
Table 71 Support status of HORCM_MON parameter description format
Item
Version
timeoutpollserviceip_address
YesYesYesYes6.1 or later
YesYes
Only supports port num-
ber specification.
Yes5.9 to 6.0
YesYes
Only supports port num-
ber specification.
Supports IP address, host
name, and NONE.
5.8
YesYes
Only supports port num-
ber specification.
Supports IP address and
host name.
Earlier than 5.7
Legend:
Yes: Supports all description formats.
Related topics
• Editing the configuration definition file, page 221
• Description conventions for the configuration definition file, page 223
• HORCM_INST parameter description format, page 230
• HORCM_INSTP parameter description format, page 232
• Notes on using the configuration definition file, page 234
HORCM_CMD parameter description format
Specify a command device for the storage system in the HORCM_CMD parameter.
• dev_name
Specify a command device that is recognized by the host. You can specify more than one command
device in the same system, and you can specify a command device in more than one system.
In Windows, you can specify a command device in IPCMD format, PhysicalDrive format, GUID
format, or CMD format.
IPCMD format
\\.\IPCMD-IP-address-of-the-virtual-command-device-port-number[-unit-
ID-of-the-storage-system]
PhysicalDrive format
\\.\PhysicalDrivedisc-number-defined-by-Windows
Administrator Guide (Web Version) 225