HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

For the Device Manager agent 1.1 or earlier, this item is case sensitive.
GUID format
\\.\Volume{GUID}
CMD format
\\.\CMD-serial-number[-logical-device-number[-port-name[-host-group-
number]]]
You must use base-10 numbers to specify the serial number and logical device number. For
the host group number, if the version of the Device Manager agent is 5.6 or later, specify a
value from 0 to 254. If the version of the Device Manager agent is 5.5 or earlier, specify a
value from 0 to 127.
In UNIX, you can specify a command device in IPCMD or CMD format, or in a special file.
IPCMD format
\\.\IPCMD-IP-address-of-the-virtual-command-device-port-number[-unit-
ID-of-the-storage-system]
CMD format
\\.\CMD-serial-number[-logical-device-number[-port-name[-host-group-
number]]]HINT
You must use base-10 numbers to specify the serial number and logical device number. For
the host group number, if the version of the Device Manager agent is 5.6 or later, specify a
value from 0 to 254. If the version of the Device Manager agent is 5.5 or earlier, specify a
value from 0 to 127.
Specify the HINT as follows.
Solaris: /dev/rdsk/
AIX: /dev/rhdisk
Linux: /dev/sd
HP-UX: /dev/rdsk/ or /dev/rdisk/disk
Table 72 Support status of HORCM_CMD parameter description format
Item
Version
dev_name
YesWindows
7.4.1 or later
YesUNIX
YesWindows
7.1 to 7.4.0
Only supports specification using a special file or specification using IPCMD
format.
UNIX
Supports description formats other than IPCMD format.Windows
05-10 to 7.0
Only supports specification using a special file.UNIX
Supports description formats other than IPCMD and CMD format.Windows
05-00
Only supports specification using a special file.UNIX
Supports description formats other than IPCMD, CMD and GUID formats.Windows
01-00 to 01-
10
Only supports specification using a special file.UNIX
Using the Device Manager agent226