HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

• The same dev_name value must not be duplicated in a configuration definition file.
• Specify no more than 31 single-byte characters. A hyphen (-) cannot be specified at the be-
ginning of the character string.
• Serial#
Specify the system number of the storage system using the decimal number or serial-num-
ber:journal-ID format.
• CU:LDEV(LDEV#)
Specify the LDEV number using the decimal number, hexadecimal number, or CU:LDEV format.
The following are examples of LDEV#:
Base-10 numbers
260
Hexadecimal numbers
0x104
CU:LDEV format
01:04
• MU#
Specify the mirror descriptor using a numeric value or h addition. You can omit this by leaving it
blank.
The value that can be specified for MU# differs depending on the version and copy type of the
Device Manager agent, as shown below.
When the version of the Device Manager agent is 7.4.0 or later:
Business Copy: 0 to 2
Snapshot: 0 to 63
Fast Snap: 0 to 63
Continuous Access: Not specified
Continuous Access Journal: 0
#
, h1, h2, or h3
#:
When specified, multi-target configuration pairs cannot be created with Continuous Access.
When the version of the Device Manager agent is from 6.0 to 7.3.1:
Business Copy: 0 to 2
Snapshot: 0 to 63
Continuous Access: Not specified
Continuous Access Journal: 0
#
, h1, h2, or h3
#:
When specified, multi-target configuration pairs cannot be created with Continuous Access.
When the version of the Device Manager agent is 5.9 or earlier:
Business Copy: 0 to 2
Snapshot: 0 to 31
Continuous Access: Not specified
Administrator Guide (Web Version) 229