HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

Continuous Access Journal: h1, h2, or h3
Table 74 Support status of HORCM_LDEV parameter description format
Item
Version
MU#CU:LDEV(LDEV#)Serial#dev_namedev_group
YesYesYesYesYes6.2 or later
Yes
Supports description
formats other than the
serial-number:journ-
al-ID format.
YesYesYes6.1 to 05-60
NoNoNoNoNo
Earlier than
05-50
Legend:
Yes: Supports all description formats.
No: Does not support any description formats.
Related topics
• Editing the configuration definition file, page 221
• Description conventions for the configuration definition file, page 223
• Notes on using the configuration definition file, page 234
HORCM_INST parameter description format
Use the HORCM_INST parameter to specify machine information for the remote host.
• dev_group
Specify the contents specified for dev_group of the HORCM_DEV parameter or HORCM_LDEV
parameter.
• You cannot specify ip_address more than once for the same host for a single dev_group.
• Specify no more than 31 single-byte characters. A hyphen (-) cannot be specified at the be-
ginning of the character string.
• ip_address
Specify the IP address (a Device Manager agent whose version is 5.9 or later also supports the
IPv6 protocol), the host name, NONE, or NONE6. If you specify NONE or NONE6, the local host is
assumed. If you use Replication Manager to add a new group to the existing configuration defin-
ition file, this item will always be specified using the host name.
• Specify the information for the host managed by the Device Manager server.
• Match the IP address version (IPv6 or IPv4) to the one specified for HORCM_MON.
• When an IPv6 environment is being used, you cannot specify a host name. If you specify a
host name, an IPv4 environment is used.
Using the Device Manager agent230