HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

• The table below lists the values that can be specified for ip_address. Note that some formats
cannot be specified for ip_address because they cannot identify a host.
Table 75 Values that can be specified for the ip_address of HORCM_INST parameter
Device Manager agent version
Value
05-70 or earlier05-80 or later
YesYesIP address
YesYesHost name
No
Yes
#
Loopback IP addresses (127.0.0.1 to
127.255.255.254)
No
Yes
#
Loopback host name (localhost)
NoNoCluster virtual IP address
NoNoCluster virtual machine name
Legend:
Yes: Can be specified.
No: Cannot be specified.
#: Can be specified when the copy pair is managed from the Device Manager CLI. However,
this item cannot be specified when copy pair operations are performed from the Device Man-
ager GUI or Replication Manager.
• service
Specify the port name or port number.
• Specify the port name using 1 to 15 single-byte characters. The environment must support the
conversion of port names to port numbers.
• Specify the port number as a numeric value from 0 to 65535.
Table 76 Support status of HORCM_INST parameter description format
Item
Version
serviceip_addressdev_group
YesYesYes7.0 or later
Yes
Supports IP address and host
name.
Yes6.1 to 6.4
Only supports port number
specification.
Supports IP address and host
name.
Yes
Earlier than
6.0
Legend:
Yes: Supports all description formats.
Related topics
• Editing the configuration definition file, page 221
• Description conventions for the configuration definition file, page 223
Administrator Guide (Web Version) 231