HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)
• HORCM_MON parameter description format, page 224
• HORCM_DEV parameter description format, page 227
• HORCM_LDEV parameter description format, page 228
• Notes on using the configuration definition file, page 234
HORCM_INSTP parameter description format
Use the HORCM_INSTP parameter to specify the machine information and path group ID of the remote
host.
• dev_group
Specify the contents specified for dev_group of the HORCM_DEV parameter or HORCM_LDEV
parameter.
• You cannot specify ip_address more than once for the same host for a single dev_group.
• Specify no more than 31 single-byte characters. A hyphen (-) cannot be specified at the be-
ginning of the character string.
• ip_address
Specify the IP address, the host name, NONE, or NONE6. If you specify NONE or NONE6, the local
host is assumed. If you use Replication Manager to add a new group to the existing configuration
definition file, this item will always be specified using the host name.
• Specify the information for the host managed by the Device Manager server.
• Match the IP address version (IPv6 or IPv4) to the one specified for HORCM_MON.
• When an IPv6 environment is being used, you cannot specify a host name. If you specify a
host name, an IPv4 environment is used.
• The table below lists the values that can be specified for ip_address. Note that some formats
cannot be specified for ip_address because they cannot identify a host.
Table 77 Values that can be specified for the ip_address of HORCM_INSTP parameter
Device Manager agent version
Value
7.6.0 or later
YesIP address
YesHost name
Yes
#
Loopback IP addresses (127.0.0.1 to 127.255.255.254)
Yes
#
Loopback host name (localhost)
NoCluster virtual IP address
NoCluster virtual machine name
Legend:
Yes: Can be specified.
No: Cannot be specified.
#: Can be specified when the copy pair is managed from the Device Manager CLI. However,
this item cannot be specified when copy pair operations are performed from the Device Man-
ager GUI or Replication Manager.
• service
Using the Device Manager agent232