HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)
Message details for Device Manager server requests
This section describes the output format of message details that are output when the Device Manager
server receives a request. The item enclosed by square brackets ([ ]) might not be output.
command target[ option][ parameter]
The following table describes the information output in message details:
Table 98 Information output in message details
DescriptionItem
A character string (3 characters) that indicates the operation (for example,
addition, deletion, modification, or reference) to be performed on the resource.
For the meaning of the output character string, see “Commands in message
details” on page 267.
command
Information that identifies the operation to be performed. For information on
the target to be output in the message text, see “Targets in message de-
tails” on page 268.
target
Information that identifies the operation to be performed. This information is
output only when one or more options are specified. For more information on
the meanings of output options, see “Options in message details” on page 270.
If two or more options are specified, a semicolon (;) is used as a separator.
option
Information that identifies the operation to be performed and the resource on
which the operation is to be performed. (This information is output only when
it is specified by request.) This information is output in tagged format. For de-
tails about output parameters, see “Parameters in message details” on page 273.
parameter
The following sections describe the information that is output.
Commands in message details
The table below lists the commands that can be output in message details.
Table 99 Commands output in message details
OperationFull name
Output character
string
AdditionAdd
Add
DeletionDelete
Del
AcquisitionGet
Get
ImportingImport
Imp
General operation for an SMI-S enabled storage systemInvoke
Ivk
ModificationModify
Mod
Administrator Guide (Web Version) 267